KP servo electric hydraulic...
 KP energy saving system
 KP60G General inverter
 KP90G elevator inverter
 KP200 controller
 KP80G controller
 KP-60G X cutting inverter
 KP-BR controller
 KP Special servo drive
 KP Permanent magnet servo
Asynchronous servo inverter
KP escalator controller
 Japan Sumitomo pump
 KP Lathe special inverter
Lathe Servo
Energy Japan
More>>  
 KP90G parameters
 KP60G parameters



Servo electric hydraulic driving system
 


Introduction:
  It is the high quality control system with vector control company independent research and development,pressure sensor using thin-film technology design accurately the pressure values are converted to electrical signals,the accuracy reaches level 0.5,and double closed loop control of pressure and flow,the movement speed DSP control algorithm to achieve speed control error of plus or minus 0.1%,meet the need of high precision products. Application:the German rush grams,Shanghai step,and PLC etc..

characteristics:

  Energy saving:Compared to the traditional driving energy system bottom 30%-80%.
  Accurate:Precise closed-loop control, forming the repeat accuracy is obviously improved.
  High efficiency:The response speed quick,the startup time is only 0.02S-0.05S.
  Low noise:the complete series with low noise continuum technology of hydraulic pump.
  Low temperature rise: according to the proportion of the hydraulic pump output, to avoid excess heat generation, temperature is low, the hydraulic pump even without cooling, to achieve substantial water saving, energy saving.

Specifications:

 
SCP90
SCP130
SCP160
SCP200
SCP250
SCP280
SCP320
SCP500
Clamping force(T)
90
130
160
200
250
280
320
500
maximum engine(L/min)
67
80
95
120
145
200
230
126
180
Pump delivery(cc/r)
32
40
45
50
63
75
90
63
75

Parameters:
KEPU90ZS4T***BE
0075
0110
0150
0185
0220
0300
0370
0450
0550
0750
Rated power
7.5
11
15
18.5
22
30
37
45
55
75
output current(10S)
33
41
50
60
80
100
125
145
190
210
output current(60S)
25
35
45
50
65
80
100
130
150
190

db resistor

W
500
800
1000
1000
1000
1000
1600
1600
1600
1600
Ω
36
24
24
18
18
18
12
12
12
12
Filter a
35
35
35
50
50
80
80
100
150
200
Resolver signal cable
Unit:cm.Such as:KEPU90-300 On behalf of cable length is 3M
Pressure sensor
Can choose a variety of pressure sensor,the corresponding parameters of S-00,0-10V output signal of pressure sensor.
Circuit breaker
50
50
60
75
100
100
150
150
200
200

Size(unit:mm)

Number PowerkW A(mm) Number W(mm) H(mm) D(mm) Aperture
1 7.5 193 288 205 300 200 Ø7
2 11~15 190 377 256 395 196 Ø7<
3 19~22 236 449 280 467 245 Ø7<
4 30~37 250 611 360 635 234 Ø12
5 45~55 270 638 400 668 243 Ø12
6 75 300 747 444 777 260 Ø

Copyright 2018 KEPU GROUP. All Rights Reserved   
Address: KEPU Yinzhou industrial Zone, Yinzhou County, Ningbo, Zhejiang Province, China 315040    
Tel:+86 0574 8823 3677  Fax:+86 0574 8823 9359   E-mail:twz2005108@163.com